M1942 rifle

seems impossible. confirm. agree with..

M1942 rifle

Firearms and cylinders cannot be returned or exchanged with the exception of manufacturer defect. This rifled musketwith the lock marking " Springfield" and an eagle, was the principal infantry arm of the civil war. Produced in tremendous numbers by the Union and captured by the Confederacy, this is the arm that most soldiers on both sides carried.

A handsome, durable and accurate rifle, the model was the most widely produced American military long arm to that time. During the Civil War over 1, of the pattern rifle muskets were produced by the Springfield National Armory and 2 private Contractors. The one-piece barrel is forged steel. Features a swelled ramrod, like the original muskets. The bayonet is designed for the Springfield.

Attached to the rifle the bayonet gave close quarters weapons an extra long reach. Brass mounted leather scabbard, with integrated frog, included.

Excellent replica of the originals with great attention to details. The blade length is 17". This musket saw service by both the Union and Confederate troops during the Civil War. The British Enfield Rifle Muskets were purchased in large numbers. This Enfield replica has all the features of the original, including a one-piece, oil-finished stock, blue barrel, original-style barrel bands, and brass nose cap.

The percussion lock has a V-style mainspring. This piece has a blued steel barrel and bands, brass butt plate and trigger guard. The bayonet is designed for the 3-band Enfield long rifle. Brass mounted leather scabbard included.

Brass mounted leather scabbard for 3-Band Enfield Rifle bayonet. The length is approximately 17". Click on picture for larger image. This Enfield cartridge box is made per British regulations in black leather with white linen thread. The tins are included. Per the original the box has cartridge box sling loops on the back. It cannot be worn on a belt. Thew well-balanced 2-band Enfield Musket saw extensive service during the Civil War. The British Enfield Rifle Muskets were purchased in large numbers and used by both sides.

This excellent replica features an oil-finished walnut stock, case-hardened percussion lock, and correct period screws. Leather musket sling available in black. Select Enfield approximately 49 inches or Springfield approximately 39 inches for the correct length.

Leather musket sling available in russet. This Musket Sling is made of high quality American leather and is stamped with a period correct makers stamp. Available in Russet Leather only. Linen musket sling. Musket cleaning kit for. Musket cleaning kit bag will hold your. The bag is made of Canvas and has a button flap to close and secure your kit. This model was produced in larger numbers than any other Confederate long arm and is a direct copy of the US Model with the exception of eliminating the Maynard priming system for the lock.Remember Me?

Results 1 to 12 of Thread: Correct bayonet for Remington Springfield rifle. Thread Tools Show Printable Version. Correct bayonet for Remington Springfield rifle. I have a beautiful version of the above rifle and I was given a bayonet when I bought the rifle. I have since been told that it is not the correct bayonet for the rifle even though it fits. The previous owner mentioned that the bayonet was with the rifle when he bought it.

I had paid for the rifle, he went inside and wrote a reciept while I waited in his garage with the rifle and he returned with the reciept and the bayonet, so it was an unexpected bonus. Which is the correct bayonet and how can I identify it?

We're burnin' daylight! This is a U. Model bayonet made in and refurbished for WW2. The scabbard is correct for WW2, the earlier scabbards were canvas with a leather tip. The approval to cut down the longer M bayonets happened in the summer of '43 and started in September. The M3 plastic scabbards for the were approved in early September of '41 - the decision to make them being based on deteriorated condition of a lot of the older types on hand.

Production on them started slowly in January '42 with only a couple thousand, peaked in July with just shy ofand ended in February '43 with just over three million of them having gone out the door. The M3 was the new standard; the canvas M as "substitute standard" and the leather M as "limited standard".

I'm not a pointy-stabby expert, but I'm thinking there are a few options that collectors could argue about being "correct".

I think the attitude in - especially EARLY '42 - was that anything that fit on the rifle you could stab a Nazi or Jap with was "correct", and any scabbard you could fit it into was "good enough". Other than being able to look sufficiently uniform while on parade, and not have consistency problems with training or equipment issue, I doubt ANYONE at the time thought or cared much about the differences when it came to boxing them up and shipping them out.

Last edited by Scharfschuetze; at PM. Keep your powder dry, Scharf. Originally Posted by Scharfschuetze. Keep in mind that the A3 was issued in WWII and thus any of the original or cut down Springfield bayonets will be correct on the rifle. I don't think that Ordnance officers particularly cared what version of the Springfield or M1 Garand bayonet went on it.

Issue was on a unit by unit basis for uniformity of training so take your pick and you'll be good to go. As A3 rifles were usually used by those guys in the rear with the gear, it probably wasn't a high priority to outfit the Army support units all that uniformly across several theaters of war.

Interestingly, the M Bayonet was also used on the M and M12 Winchester shotguns when fitted with hand guards and bayonet lugs. This may help you ID the manufacturer of your bayonet.

Service members, veterans and those concerned about their mental health can call the Veterans Crisis Line to speak to trained professionals. To talk to someone, call and Press 1, send a text message to or chat at VeteransCrisisLine. If you or someone you know might be at risk of suicide, there is help. Call the National Suicide Prevention Lifeline attext a crisis counselor at or visit suicidepreventionlifeline. The rifle is not an 03A3, but in the original format with teenager ready sight.

Thanks for the onfo.It became the standard-issue rifle for the U. Army by and the U. Marine Corps by until being replaced by the M16 rifle beginning in The M14 was used by U.

U.S. M1 Garand Rifle Bayonet (M-1942) Long Version 16"

The M14 was the last American battle rifle issued in quantity to U. It was replaced by the M16 assault riflea lighter weapon using a smaller caliber intermediate cartridge. The M14 rifle remains in limited service in all branches of the U. Civilian semi-automatic models are used for hunting, plinking, target shooting, and shooting competitions.

Civil War Muskets, Rifles & Carbines, Enfield & Springfield

The M14 was developed from a long line of experimental weapons based upon the M1 Garand rifle. Although the M1 was among the most advanced infantry rifles of the late s, it was not an ideal weapon. Modifications were already beginning to be made to the basic M1 rifle's design during the last months of World War II. Changes included adding fully automatic firing capability and replacing the eight-round en bloc clips with a detachable box magazine holding 20 rounds.

Garand's design, the T20was the most popular, and T20 prototypes served as the basis for a number of Springfield test rifles from through the early s. Rene Studler, then serving in the Pentagon. The T44 prototype service rifle was not principally designed by any single engineer at Springfield Armory, but was a conventional design developed on a shoestring budget as an alternative to the T Army facilities in the Arctic.

In Junefunding became available to manufacture newly fabricated T44 receivers specially designed for the shorter T65 cartridge. TRW would later be awarded a production contract for the rifle as well.

m1942 rifle

Springfield Armory later upgraded 2, M14 rifles in and 2, M14 rifles in to National Match specifications, while 2, M14 rifles were rebuilt to National Match standards in at the Rock Island Arsenal. Production M14 rifles made by Springfield Armory and Winchester used forged receivers and bolts milled from AISI steel, a low-carbon molybdenum-chromium steel. After the M14's adoption, Springfield Armory began tooling a new production line indelivering the first service rifles to the U. Army in July However, long production delays resulted in the st Airborne Division being the only unit in the army fully equipped with the M14 by the end of Springfield Armory records reflect that M14 manufacture ended as TRW, fulfilling its second contract, delivered its final production increment in fiscal year 1 July — 30 June The Springfield archive also indicates the 1.

The rifle served adequately during its brief tour of duty in Vietnam. However, there were several drawbacks to the M The traditional wood stock of the rifle had a tendency to swell and expand in the heavy moisture of the jungle, adversely affecting accuracy.

Fiberglass stocks were produced to resolve this problem, but the rifle was discontinued before very many could be distributed for field use. Also, because of the M14's powerful 7. The intention was to simplify the logistical requirements of the troops by limiting the types of ammunition and parts needed to be supplied. However, it proved to be an impossible task to replace all these weapons. Department of Defense comptroller.

The M14 remained the primary infantry rifle in Vietnam until it was replaced by the M16 inthough combat engineer units kept them several years longer. Further procurement of the M14 was abruptly halted in early due to the U.

Department of Defense report which had also stated that the AR soon to be M16 was superior to the MThe M1 Garand was a. Developed by John C. Though plagued by early problems, the M1 became a beloved weapon by soldiers and commanders who recognized the firepower advantage it provided over older bolt-action rifles. The US Army first began its interest in semi-automatic rifles in This was furthered inwhen testing was held using the Bang and Murphy-Manning.

Experiments continued during World War I and trials were held in Development of a semi-automatic rifle began in earnest inwhen the US Army concluded that the cartridge for its current service rifle, the Springfield Mwas far more powerful than needed for typical combat ranges. That same year, the gifted designer John C.

Garand was hired at the Springfield Armory. Serving as the chief civilian engineer, Garand began work on a new rifle.

His first design, the M, was ready for testing in This possessed a caliber of.

How to create nexus repository

After inconclusive testing against other semi-automatic rifles, Garand improved the design, producing the M Further trials in produced an indifferent outcome, though Garand did design a. In the spring ofthe Infantry and Cavalry boards ran trials which resulted in the. One of two finalists, Garand's rifle competed with the T1 Pedersen in the spring of In addition, a single. Easily defeating the Pedersen, the.

Shortly thereafter, Garand successfully retested the. In May of the following year, 75 of the new rifles were issued for testing. While Garand was designing the M1, Army Ordnance demanded that the new rifle possess a fixed, non-protruding magazine. It was their fear that a detachable magazine would be quickly lost by US soldiers in the field and would make the weapon more susceptible to jamming due to dirt and debris.

With this requirement in mind, John Pedersen created an "en bloc" clip system that permitted the ammunition to be loaded into the rifle's fixed magazine. Originally the magazine was meant to hold ten. The M1 utilized a gas-operated action that used expanding gases from a fired cartridge to chamber the next round. When the rifle was fired, the gases acted upon a piston which, in turn, pushed the operating rod. The rod engaged a rotating bolt which turned and moved the next round into place.

23andme leo

When the magazine was emptied, the clip would be expelled with a distinctive "ping" sound and the bolt locked open, ready to receive the next clip. Contrary to popular belief, the M1 could be reloaded before a clip was fully expended. It was also possible to load single cartridges into a partially loaded clip.

When first introduced, the M1 was plagued by production problems which delayed initial deliveries until September Though Springfield was able to build per day two years later, production was slow due to changes in the rifle's barrel and gas cylinder.ZiS was a factory designation and stood for Zavod imeni Stalina "factory named after Stalin "the honorific title of Artillery Factory No. Technical Manual, TM Artillery Factory No. The addition of a muzzle brake reduced recoil and prevented damage to the light carriage upon firing.

Producing a ZiS-3 cost only a third of the time and two-thirds of the money of a FUSV by making greater use of casting, stamping and welding. Grabinthe chief designer of Soviet medium caliber guns, initiated the gun's development without state approval, and the prototype was hidden from the state. At Artillery Factory No. The factory's ZiS-3 stockpile grew and went unused as the Red Army refused to accept the guns without the usual acceptance trials.

Grabin convinced the army to issue the guns for impromptu testing at the front, where it proved superior to existing divisional field guns. A subsequent demonstration impressed Joseph Stalinwho praised the weapon as "a masterpiece of artillery systems design. Grabin worked to increase production at Artillery Factory No. Conveyor assembly lines admitted the use of low-skilled labour without significant quality loss. Experienced laborers and engineers worked on complicated equipment and served as brigade leaders; they were replaced on the production line by young factory workers who were exempt from conscription, producing a new generation of skilled labourers and engineers.

Centro noticias campoalegre

More thanZiS-3s were produced by the end of the war, making it the most numerous Soviet field gun during the war. Mass production of the ZiS-3 ceased after the war. The D had better anti-armour capabilities, but inferior mobility due to its increased weight. This Romanian-produced copy was tested against several Romanian-designed prototypes as well as some foreign models, until eventually one of the Romanian prototypes was selected for production as the Tunul antitanc DT-UDR 26, cal.

More than 14, were produced between and The KSP was a wartime light assault car mounting the ZiS-3; it did not advance beyond the prototype stage. Soviet soldiers liked the ZiS-3 for its extreme reliability, durability, and accuracy.

The gun was easy to maintain and use by novice crews. The gun was also quite popular with the German Wehrmacht. The gun was introduced into German service as the Kanone 7. ZiS-3 had good anti-armour capabilities. Its armour-piercing round could knock out any early German light and medium tank. The frontal armour of later tanks, like the Tiger I and later the Pantherwere immune to the ZiS-3 [ citation needed ]. A ZiS-3 battery had four guns; three batteries made a division, or battalion.

Independent anti-tank regiments consisted of six batteries with no divisions. A staff battery included a fire control section. In Europe, Austria received about 36 of them in and kept them in service until under the designation PaK-M Inthe gun remained in active service with the armies of at least six sovereign nations: CambodiaNicaraguaNamibiaSudanMozambiqueand Tanzania.

From Wikipedia, the free encyclopedia.

m1942 rifle

Redirected from ZiS This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources.

Unsourced material may be challenged and removed. Type of Field gun. The tactical characteristics of the ZiS was a factory designation and stood for Zavod imeni Stalina "factory named after Stalin "the honorific title of Artillery Factory No. Grabinthe chief designer of medium caliber Soviet guns.

There was no order for this work; moreover, at this time the attitude toward such development programs on the part of artillery commanders, such as Marshal Kulik, the head officer of Soviet artillery, was extremely negative. So the project was run purely on the initiative of Grabin, his design bureau and the Artillery Factory No. None of them informed state authorities i.

m1942 rifle

Marshal Kulik about the ZiS-3 project. In order to decrease the gun's recoil a muzzle brake was installed. This allowed the barrel to be mounted on a relatively light carriage without the risk of mechanical damage when firing.

Many parts of the gun were cast, stamped or welded in order to reduce the amount of machine work. As a result, the amount of work required to construct a single ZiS-3 gun was three times less than that of the FUSV gun. After having been built, the first ZiS-3 gun was hidden from the watchful eyes of state authorities, who continued to ignore the Red Army's need for light and medium field guns.

The authorities' main argument was the information that German heavy tanks carried exceptionally strong armour. In reality Germany did not have such tanks in early and this misinformation was the result of successful Nazi propaganda about the Neubaufahrzeug multi-turreted prototype tank.

The beginning of the Great Patriotic War showed that German tanks had weaker armour than was anticipated. Some were even vulnerable to large caliber DShK machine guns.

Marshal Kulik ordered that mass production of Grabin and the head staff of Artillery Factory No. They succeeded, but ZiS-3 was not officially tested and adopted for Red Army service.

Red Army soldiers were in urgent need of these guns, the guns themselves were fine and numerous due to improved production technology, but all of them were in stock at Artillery Factory No. After some internal struggle between Grabin's team and military representatives, ZiS-3 guns were finally transferred to the Red Army under personal responsibility of Grabin and Artillery Factory No.

Combat experience showed the superiority of ZiS-3 over all other types of divisional level field guns. This allowed the ZiS-3 to be presented to a group of state authorities headed by Joseph Stalin and thus obtain all needed approval.

After the demonstration was over Stalin said: "This gun is a masterpiece of artillery systems design.

m1942 rifle

The result of this test was quite clear - ZiS-3 was adopted by the Red Army as divisional field gun model full official name. Grabin and his team soon begun to improve on the technology used in the ZiS-3 mass production.

Artillery Factory No.

What schools are cancelled

Experienced laborers and engineers worked on complicated equipment and served as brigade leaders.The ' M' series of bayonets was initiated inand continues in use to the present. There have been several modifications to the original design, the greatest being with the introduction of the M1 subseries near the end of WWII.

The M was made for the. Rifle Model The bayonet also fits the. M1 Garand rifle or simply, M1. Inthe same basic bayonet design equipped with a plastic instead of a wood handle was again produced and designated the M bayonet.

World War II: M1 Garand Rifle

The M is an exact copy of the M Bayonet, and was manufactured in sufficient numbers to keep up with wartime production of the. Again, the blade is 16 inches long with a 4 inch long handle.

Interchangeability allowed the M bayonet to be used on any M rifle, while allowing the mounting of the earlier M bayonet on the M1 Garand rifles. The M1 Bayonet was designed to be used with the. The blade is 10 inches Beforethe M1 Garand and all variants of the M Springfield rifle were using the M and later M bayonets.

Inthe U. Army decided to shorten the bayonet design. The shortened M bayonets were re-designated as ME1. New-production inch bayonets were designated as M1 bayonets.

Vastu sastra

However, in the Pacific theater, the much longer Japanese Type 30 sword bayonet on the already very long Arisaka rifle caused many American troops to retain the longer, unmodified M bayonet. The original M scabbard had a wooden body with a rawhide cover and employed a wire belt-hanger which went over and around the supporting belt. The M scabbard was covered in canvas with a leather tip.


Goltidal

thoughts on “M1942 rifle

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top